EN
Open PostPal app
Designs

Design upload & print specs

You can upload a finished print file as a background in the Design Editor. The same format-specific print requirements apply as in the Design Editor: correct format, bleed and a free address zone. Two-sided formats require a front and back file, while one-sided formats require only the front. Valid PDFs using modern compression are rasterized to print-ready artwork at print time when needed, and the original PDF is retained.

With design upload, you use a finished print file as a background in the Design Editor instead of building the artwork there from scratch. "Weiter zum Editor" first creates the design draft. Its changes then save automatically in the editor.

Print specifications your file must meet:

  • Match the selected format (dimensions and aspect ratio).
  • Include the required bleed for edge-to-edge printing.
  • Keep the address zone free so PostPal can print the recipient address.

One-sided vs. two-sided:

  • Two-sided formats require a front and back file.
  • One-sided formats accept only the front side.

The same format-specific rules apply as in the Design Editor. PostPal checks the file against the selected format's requirements. Modern PDF compression is supported. When direct vector import is not available, the print pipeline creates and caches a 300-DPI raster fallback while keeping the original PDF.

How to set up your print file

Step 1: Set up the document at the document size

Create your document directly at the document size. That is the finished size plus 3 mm bleed on each side, so 216 x 104 mm instead of 210 x 98 mm for DIN lang. The trim line then sits 3 mm inside. You find the dimensions for each format under Formats & specifications.

Step 2: Keep the safety margin

Text, logos and important image parts need at least 6 mm distance from the edge of the file, so 3 mm inside the trim line. Backgrounds and images that should print edge to edge extend to the edge of the file, i.e. to the edge of the bleed. If they stop at the finished size, cutting leaves white slivers at the edge.

Step 3: Check color and resolution

Set up your file in CMYK with the color profile “ISO Coated v2 300% (ECI)”. This applies to all paper types, recycled paper included. Images need at least 300 dpi.

Step 4: Export as PDF

Export as PDF, ideally in the PDF/X-4 standard. In InDesign, pick the “[PDF/X-4:2008]” preset, not the default “High Quality Print”. Do not add extra bleed in the export, the bleed is already part of your document. You don't need crop marks.

Our tip: Don't export guides for the trim line and safety margin. Otherwise they end up on the printed card.

Good to know

  • Artwork that is too dark: Large areas with very high ink coverage (above 280 %) can print too dark. We point this out during the review.
  • Other PDFs: The upload also accepts other valid PDFs. Whatever cannot be processed directly is rasterized at 300 dpi.

Opening the Design Editor from a campaign draft

Create a new design from the campaign form. Opening the editor creates a design draft; its changes save automatically only in the Design Editor. Finishing the design returns with the finished design selected. Going back or using the breadcrumb keeps the former selection. If the draft was started or its design or audience assignment changed meanwhile, PostPal rejects automatic assignment. Reopen the editor from the current draft. Designs with Markdown areas are available for API Flows only.

Open in PostPal

Frequently asked questions

Can I upload a finished file instead of using the Design Editor?

Yes. Create your design with “Weiter zum Editor” and upload your finished print file as a background in the Design Editor. It must match the print specifications of the selected format. Draft changes save automatically in the editor, typing in the creation dialog does not save anything automatically.

Which requirements must my print file meet?

The file must be set up at the document size of the selected format (finished size plus 3 mm bleed on each side), keep a 6 mm safety margin from the file edge and leave the address zone free. Colors in CMYK with “ISO Coated v2 300% (ECI)”, images at 300 dpi or more. Two-sided formats also need a back-side file.

Which PDF version or compression is supported?

Ideally PDF/X-4, in InDesign via the “[PDF/X-4:2008]” preset. You can upload other valid PDF files as well. If a PDF compression variant cannot be processed directly for vector printing, PostPal automatically rasterizes it at 300 DPI on the first print render while retaining the original file.

Which color profile should I use?

CMYK with the “ISO Coated v2 300% (ECI)” profile, for all paper types.

Do I need to set bleed in the PDF export?

No. Set up the document at the document size right away, then the bleed is already included. If you add bleed in the export as well, the file becomes too large, for DIN lang for example 222 x 110 mm instead of 216 x 104 mm.

What happens with a two-sided format?

Two-sided formats require a front and back file. For one-sided formats, you upload only the front side.

Where do I find the print templates with bleed and address zone?

On the designs page under “Druckvorlagen herunterladen”. Pick your format and download the matching file.